Paint-and-Dry Booth, AKFS FlatFloor, TWEKO

The TWEKO AKFS FlatFloor paint-and-dry booth is a professional solution for automotive service centres and body shops, designed for applying and drying coatings on passenger cars, vans, light commercial vehicles and individual body components.

The key feature of the series is its installation directly on a level floor without a dedicated foundation or underground air ducts. This significantly reduces preparation work and capital costs during installation. The modular quick-assembly design also allows the booth to be dismantled and reinstalled at another location when required.

Applications

• Automotive service centres and body shops
• Passenger cars
• Vans
• Light commercial vehicles
• Vehicle body panels and components
• Application of primers, paints, enamels and lacquers

Foundation-Free Installation

The booth is installed on a prepared level floor and does not require a pit foundation or underground ventilation ducts. This simplifies integration into existing automotive workshops and reduces site-preparation costs.

• Installation on a level floor
• No underground air ducts required
• Minimal construction work
• Possibility of dismantling and reinstallation

Ventilation and Working Environment

The supply ventilation system provides a continuous and uniform flow of filtered air heated to the preset temperature. Multi-stage EU5 filtration captures dust and other contaminants before the air enters the working area.

The balanced supply and exhaust ventilation system creates positive pressure inside the booth, reducing the ingress of dust from the workshop and helping maintain clean conditions for coating application.

Temperature Ranges

• Painting temperature: 16–24 °C
• Drying temperature: 20–80 °C

The required temperature is set by the operator from the control panel and automatically maintained according to the selected operating mode.

Operating Modes

• Painting: supply of filtered and heated air with removal of paint overspray
• Purge: ventilation of the working area after coating application to remove residual vapours and overspray
• Drying: maintenance of the preset temperature and process time for coating drying
• Cooling: reduction of vehicle and booth temperature after the drying cycle

Heating System

• Diesel-fired burner
• Gas-fired burner
• Automatic maintenance of the preset temperature

Construction and Equipment

• Quick-assembly booth structure
• Supply and exhaust ventilation systems
• Multi-stage air filtration system
• Vehicle access doors
• Separate personnel access door
• Energy-efficient LED lighting around the working area
• Automatic control panel for temperature and process-time settings

Coating Materials

The booth is compatible with a wide range of coating materials, including primers, paints, enamels, lacquers and water-based coatings. A stable working environment and filtered air help achieve an even finish and reduce the risk of surface defects.

Main Benefits

• Designed for automotive service: suitable for passenger cars, vans and light commercial vehicles
• Foundation-free installation: installed directly on a level floor
• Complete process cycle: painting, purging, drying and cooling in one booth
• Coating quality: filtered air and positive pressure in the working area
• Flexibility: can be dismantled and reinstalled at another location
• Productivity: controlled temperature conditions support faster processing

Safety

• Construction made from non-combustible materials
• Explosion-protected fans and key ventilation components
• Automatic interlock prevents paint or compressed-air supply if ventilation stops
• Optional automatic fire suppression system

TWEKO AKFS FlatFloor paint-and-dry booths make it possible to create a modern automotive painting area inside an existing workshop without complex foundation work or underground ventilation infrastructure.