Planer-Thicknesser Combined, FS 310, FAHDITALIA

Combined surface and thickness planers FAHDITALIA FS 310 / FS 410 are designed for flattening solid wood workpieces and subsequently calibrating them to the required thickness. The machines combine surface planing and thickness planing functions in a single unit and are suitable for joinery workshops and small to medium-sized woodworking facilities where versatility, compact dimensions, and the ability to perform the main planing operations at one workstation are important.

The FS 310 and FS 410 models use a common cutterblock for surface and thickness planing and feature a powered workpiece feed system during thicknessing operations. The models differ in working width: the FS 310 has a 310 mm wide surface planing table, while the FS 410 provides a 410 mm working width. Maximum depth of cut is 5 mm, the thicknessing working height range is 4–225 mm, and cutterblock speed is 5000 rpm. If required, the machines can be equipped with an optional mortising unit, a TERSA cutterblock or XYLENT spiral cutterblock, as well as higher-power motors.

Advantages:

• Surface planing and thickness planing functions combined in a single machine.
• Allows creation of a flat reference surface followed by calibration of the workpiece to the required thickness.
• Maximum depth of cut up to 5 mm per pass.
• Thicknessing working height range from 4 to 225 mm for workpieces of different thicknesses.
• Powered workpiece feed at 8 m/min during thickness planing.
• Choice of 310 or 410 mm working width depending on workpiece size.
• Optional mortising unit for additional woodworking operations.
• Optional TERSA and XYLENT cutterblocks for adapting the machine to different productivity and surface finish requirements.